44,45 mm x 85 mm x 42,8 mm SKF YELAG209-112 deep groove ball bearings

Basic Static Radial Load Rating Co:31500 N; Grease Speed Rating Open/Shielded n1:6700 rpm; Oil Speed Rating Open/Shielded n2:8000 rpm; B:25.00 mm; d:45.000 mm; Grease Speed Rating n1:6700 rpm; D:100.0000 mm; Accessories:Snap-Ring; Oil Speed Rating n2:8000 rpm; Sealed Speed Rating n3:4500 rpm;

Sealed Speed Rating n3:0 rpm; Fillet Radius ra:2.00 mm; B:33.00 mm; D:350.0000 mm; Grease Speed Rating Open/Shielded n1:1600 rpm; d:280.000 mm; Accessories:Two Shields; Oil Speed Rating Open/Shielded n2:1900 rpm; Basic Static Radial Load Rating Co:183000 N; Basic Dynamic Radial Load Rating C:138000

P180°:173 kN; J max.:708.025 mm; Taconite seal (dc shaft position):TER 160; P90°:254 kN; H1:241.3 mm; da:190 mm; dc:184.15 mm; L:831.85 mm; RG:1 NPT; Eye bolt:2 x 1/2-13 UNC;

Grease:10030 kN; Pu:5420 kN; with tapered bore:560 min-1; B:224 mm; d:420 mm; Static (Cor):22.3 mm; Dynamic (Cr):12 mm; rs (min):6 mm; D:700 mm; with cylindrical bore:450 min-1;

RG:3/8 NPT; da:82.55 mm; Cap bolt:1/2-13 UNC; h:38.1 mm; Bearing limiting speed:5300 r/min; Cap bolt, SAE grade:8; A2:149.225 mm; P150°:48 kN; Da:160 mm; N1:23.813 mm;

Grease Speed Rating n1:39000 rpm; B:12.00 mm; Fillet Radius ra:0.60 mm; d:17.000 mm; Basic Dynamic Radial Load Rating C:12100 N; Fillet Radius rb:0.30 mm; D:40.0000 mm; Basic Static Radial Load Rating Co:6550 N; Oil Speed Rating n2:56000 rpm;

B:24.00 mm; Basic Static Radial Load Rating Co:106000 N; Oil Speed Rating n2:11000 rpm; d:130.000 mm; Grease Speed Rating n1:7800 rpm; Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:90400 N; Fillet Radius ra:1.50 mm; D:180.0000 mm;

Specific static load factor K0:45 N/mm²; h:222.5 mm; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:15.9 kg; d:220 mm; Coefficient of friction µ max.:0.15; α:124 °; Tolerance shaft:e7; Coefficient of friction µ min.:0.08;

B:140 mm; B1:227 mm; K:12 mm; Limiting speed:850 r/min; Ba min.:20 mm; Calculation factor Y0:4; B2:75 mm; d2 ≈:627 mm; ra max.:4 mm; D1 ≈:697 mm;

Specific dynamic load factor K:25 N/mm²; B:250 mm; Tolerance housing:H7; Tolerance shaft:e7; Coefficient of friction µ min.:0.08; α:124 °; Mass bushing:16.6 kg; a:12.5 mm; D:250 mm; Permissible sliding velocity v min.:0 m/s;

Oil Speed Rating n2:3400 rpm; B:68.30 mm; d:80.000 mm; Basic Static Radial Load Rating Co:156000 N; Accessories:One Seal & Snap-Ring; D:170.0000 mm; Grease Speed Rating n1:2400 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:182000 N; Sealed Speed Rating n3:2400 rpm;

Grease Speed Rating n1:4800 rpm; D:5.0000 in; B:0.7500 in; Basic Dynamic Radial Load Rating C:47500 N; Basic Static Radial Load Rating Co:51000 N; Oil Speed Rating n2:7500 rpm; Fillet Radius ra:0.08 in; d:3.500 in; Fillet Radius rb:0.040 in;

r, r1,2 min.:0.3 mm; B:10.5 mm; F:12 mm; d:8 mm; Mass inner ring:0.005 kg;

Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating C:728000 N; Grease Speed Rating n1:1000 rpm; Basic Static Radial Load Rating Co:1580000 N; Oil Speed Rating n2:1400 rpm; Fillet Radius rb:1.50 mm; D:460.0000 mm; d:300.000 mm; B:148.00 mm;

N:11.5 mm; A5:20 mm; A1:13 mm; Bearing:YELAG 206; A3:3.2 mm; Recommended tightening torque for grub screw:6.5 N·m; J:82.5 mm; d:30 mm; N4:4 mm; End cover:ECY 206;